Introduction to Gate Opener Remotes
Understanding the Purpose of a Gate Opener Remote
A gate opener remote is a crucial device that allows you to operate your automatic gate effortlessly. With a simple push of a button, you can open or close your gate, enhancing security and convenience.
Importance of Properly Programming Your Remote
Programming your gate opener remote correctly ensures smooth operation, minimizes security risks, and prevents unauthorized access.
Common Types of Gate Openers
Different types of automatic gates require specific programming methods. Here are the most common ones:
Swing Gate Opener
This type of opener is designed for gates that swing inward or outward, commonly used in residential areas.
Sliding Gate Opener
Ideal for properties with limited space, sliding gate openers move the gate horizontally along a track.
Roller Gate Opener
These openers rolls for gates that swing inward suitable for residents and villas.
Preparing for Programming
Gathering Necessary Tools and Materials
Before programming, ensure you have:
- Your gate opener remote
- The gate opener’s control unit
- The user manual
- A small screwdriver
Identifying Your Gate Opener Mode
Locate your gate opener’s model number, usually found on the control box. This is essential for following the correct programming steps.
Reviewing the User Manual for Specific Instructions
Each gate opener has unique programming requirements. Read your manual carefully before proceeding.
Step-by-Step Programming Instructions
Swing Gate Opener Programming (F600 Series)
- Memorizing a new transmitter
a. Programming transmitter button for both leaves:
Press CODE and hold for 2S, the code LED DL6 is on, press button 1
of the transmitter twice, the code LED DL6 is off, button 1 can operate both leaves.
b. Programming transmitter button for single leaf:
Press CODE and hold for 2S, the code LED DL6 is on, press CODE again
the LED DL6 is flashing, press button 2 of the transmitter twice, the code LED DL6 is off, button 2 can operate one of the leaves.
Note:
a. When the code LED DL6 is flashing, if the user does not need to program transmitter button for single leaf, press CODE button to exit the programming.
b. The control unit can memorize Max. 25 pcs transmitters.
c. If button 1 is for both leaves, button 2 is for single leaf, it is invalid to code button 1 for single leaf.
d. If button 1 is for both leaves, button 2 is for single leaf, now the user programmes button 2 for both leaves, then button 1 will be invaild at the same time. - Deleting all transmitters
Press CODE and hold for 10S to delete all transmitters.
(Note: If the procedure is performed correctly, press the buttons of any transmitters can not operate the unit.)
Sliding Gate Opener Programming (F500 & F550 Series)
F500 Series
- Memorizing a new transmitter
1) Full closing/opening button coding:
Press CODE for 2S and release, the DLS LED will be on, press the desired button twice to control the sliding gate opener, the D15 LED will be off, which indicates the button is memorized.
2) Pedestrian access button coding:
Press CODE for 2S and release, the DL5 LED will be on, press again, the DIS LED will be flashing, press the desired button twice to control the sliding gate opener for pedestrian access, the DLS LED will be off, which indicates the button is memorized.
(Note: If you want to exit the coding during the flashing of DLS LED, press CODE again to make the DLS LED turn off.)
Note:
a. Max 16 transmitters can be memorized.
b. Transmitter working mode: OPEN-STOP-CLOSE - Deleting all transmitters
Press CODE button for about 8S until the CODE LED turns off.
(Note: If the procedure is performed correctly, pressing any control buttons of any transmitters can not make the unit work. )
F550 Series
- Memorizing a new transmitter
1.1 Full Open coding:
a. Press the C button for 2 seconds, the digital tube single digit is flashing
b. Press any button on the remote control twice, the decimal point of the digital tube is off, indicating that the full-open key is successfully coded
1.2. Pedestrian key code:
Pedestrian key code, press C key for 2 seconds when the door opener is stopped, the digital tube single digit lights up, release and then press C key, the decimal point will flash, then press any key of the remote control 2 times, the digital tube single digit light Off, indicating that the pedestrian key code is successful.
Remarks:
Press C to flash to the decimal point. No operation is performed within 10 seconds. After the extinction, the pedestrian key coding will be canceled.
Note:
Up to 120 remote controls can be coded, when coded with 121 remote control, the first remote control is invalid. - Deleting all transmitters
Press button for about 8 seconds until the decimal point is off, which indicates all the memory and transmitters are deleted.
Roller Gate Opener Programming (F630 Series)
- Memorizing a new transmitter
a . Full button matching:
Press the matching button on the control board CODE for 1 second, the LED1 light is on, and press the button 1 on the remote control twice.
The LED 1 light is off, indicating that the code is successfully matched, and it can be equipped with up to 50 remote controls.
B. Single door button matching:
Press the matching button CODE on the control board, For 1 second, the LED1 light is on, and press the matching button CODE again For 1 seconds, The LED1 light flashes, at this time press button 2 on the remote control twice, The LED 1 light is off, indicating that the code is successfully matched, and it can be equipped with up to 50 remote controls.
Note:
1. When the motor is running, pressing the CODE button to match the code is invalid.
2. In the matching code state, press other keys can exit the matching immediately.
3. In the matching code state, if the matching operation is not performed, the matching will be automatically exited after 15 seconds, or press the CODE button twice again to exit the matching operation. - Deleting all transmitters
Press and hold the matching code button remote control CODE for 8 seconds to decode all the transmitters.
(After decoding, all remote controls cannot remotely control the door opener).
Maintenance Tips for Your Gate Opener Remote
Battery Care and Replacement
- Replace batteries regularly to ensure optimal performance.
- Use high-quality batteries for longer life.
Cleaning and Protecting the Remote
- Clean the remote with a dry cloth.
- Store in a dry place to prevent moisture damage.
Alternatives to Gate Remote
WiFi Remote Control (Mobile App)
A WiFi-enabled remote connects your gate opener to your smartphone, allowing you to control your gate from anywhere using an app.
GSM Operator
A GSM-based system uses a SIM card to send SMS commands to open or close the gate, providing a secure and remote-controlled solution.
Conclusion
Programming your gate opener remote is a simple yet essential task that enhances security and convenience. By following the steps outlined, you can program your remote quickly and efficiently. Whether you use a traditional remote, a WiFi app, or a GSM operator, ensuring proper setup will keep your gate functioning seamlessly.
FAQs
- FAQs
- Q: Can I program multiple remotes for the same gate opener?
A: Yes, most gate openers allow multiple remotes, but they have a maximum limit. - Q: What should I do if I lose my gate opener remote?
A: You should delete all stored transmitters and reprogram new ones to maintain security.
By following this guide, you can confidently program your remote gate opener and explore alternative solutions for enhanced convenience and control.
